亚洲一区二区精品,黄色软件视频免费,国产精品国产三级国产专不?,性福宝软件下载

墻體繪畫機使用時要注意哪些事
對于墻體彩繪機可以有很多朋友都不是很了解，其實彩繪機并不是很新穎的電器，只是以前沒有用于墻體的種類。墻體畫是一種很傳統的繪畫方式，墻體彩繪機的出現會更加促進墻體畫的普通。那么下面就來給大家講解一下墻體彩繪機使用時要注意哪些事項?


墻體繪畫機使用時要注意哪些事項？


　　1、下雨天或即將要下雨時是不能施工的，有光柵的機器在風力過大時也要停止施工，因?yàn)轱L(fēng)力過大會造成光柵擺動，從而會造成打印的圖案出現錯位;無光柵的機器受風力的影響小，但是風力太大時也要停止施工，因?yàn)轱L(fēng)會把噴出來的墨吹散，造成畫面模糊。


　　2、注意在機器的正上方有沒有空調開啟，不要讓水滴下來落到機器上;在施工過程中注意機器上的各種線路是否會相互干擾、拉扯，在調整機器與墻面距離時注意噴頭不要碰到墻面，以防撞壞噴頭;注意水平的調整，平?jīng)]有調整好會影響圖片打印出來的效果。


　　3、在機器工作時盡量不要讓無關的人員靠近，同時工作人員也要注意，防止無意中碰掉機器電源，造成機器斷電帶來不必要的麻煩;在晝夜溫差過大的地區，每天在施工之前要打一副圖來測試一下光柵是否正常，以免直接上墻造成不必要的麻煩和損失。
What should be paid attention to when using the wall painting machine?
There are many friends who are not familiar with the wall painting machine. In fact, the color painting machine is not a very novel electrical appliance, but it has not been used in the wall before. Wall painting is a very traditional way of painting. The appearance of wall painting machine will promote the common of wall painting. So let's explain to you what should be paid attention to when using the wall painting machine?
What should be paid attention to when using the wall painting machine?
1. In rainy days or when it is about to rain, the construction of machines with grating shall be stopped when the wind is too strong, because the wind will swing the grating, which will cause the printed pattern to be misplaced; machines without grating will be less affected by the wind, but the construction shall also be stopped when the wind is too strong, because the wind will blow the ink out and make the picture fuzzy.
2. Pay attention to whether the air conditioner is turned on at the top of the machine, and do not let the water drop onto the machine; pay attention to whether various lines on the machine will interfere with each other and pull during the construction process, and pay attention to the nozzle not touching the wall when adjusting the distance between the machine and the wall, so as to avoid damaging the nozzle; pay attention to the adjustment of the level, and the adjustment of the level will affect the effect of printing pictures.
3. When the machine is working, try not to let irrelevant personnel near. At the same time, the staff should also pay attention to prevent inadvertently touching the power supply of the machine, causing unnecessary trouble due to the power failure of the machine. In the area where the temperature difference between day and night is too large, a picture should be made every day before the construction to test whether the grating is normal, so as to avoid unnecessary trouble and loss caused by directly going on the wall.